CHAPTER 12
AUTOCONFD System Log Messages
This chapter describes messages with the AUTOCONFD prefix. They are generated by
the auto-configuration process (autoconfd).
AUTOCONFD_AUTHENTICATE_LICENSE
System Log Message Authentication failed due to license error. Total license failures count
Description The auto-configuration process (autoconfd) failed to authenticate the clients because
there were no licenses or an insufficient number of licenses. The indicated number of
license failures occurred and the clients were denied access and configuration.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
Action Add or update the license for authentication
111Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...