Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Chapter 16 BOOTPD System Log Messages

CHAPTER 3
ALARMD System Log Messages
This chapter describes messages with the ALARMD prefix. They are generated by the
alarm process (alarmd).
ALARMD_CONFIG_ACCESS_ERROR
System Log Message function-name: error-message
Description The alarm process (alarmd) experienced the indicated problem while attempting to
parse the configuration database.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
ALARMD_CONFIG_CLOSE_ERROR
System Log Message Unable to close configuration database
Description The alarm process (alarmd) could not close the configuration database.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
ALARMD_CONFIG_PARSE_ERROR
System Log Message Unable to parse configuration; using defaults
Description The alarm process (alarmd) could not parse the configuration and used default values
while initializing.
Type Error: An error occurred
Severity error
59Copyright © 2010, Juniper Networks, Inc.