Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 55
LOGIN System Log Messages
This chapter describes messages with the LOGIN prefix. They are generated by the login
process (login), which performs authentication for Telnet sessions.
LOGIN_ABORTED
System Log Message Client aborted login
Description A login attempt was cancelled, either by the remote user or in response to a signal.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_AUTH
LOGIN_FAILED
System Log Message Login failed for user username from host hostname
Description A login attempt failed for the indicated username.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_AUTH
LOGIN_FAILED_LIMIT
System Log Message Specified number of login failures (limit) for user 'username' reached from 'remote-address'
Description Several login attempts failed for the indicated username.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_AUTH
LOGIN_FAILED_SET_CONTEXT
System Log Message Failed to set context for user username
431Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English