Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The login process (login) could not set login context properties for the indicated user
and cancelled the authentication attempt.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
LOGIN_FAILED_SET_LOGIN
System Log Message Failed to set login ID for user username: error-message
Description The login process (login) could not assume the user ID of the indicated user and cancelled
the authentication attempt.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
LOGIN_HOSTNAME_UNRESOLVED
System Log Message Unable to resolve hostname hostname: error-message
Description The login process (login) could not resolve the indicated remote hostname for the
indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Cause An internal software failure occurred.
LOGIN_INFORMATION
System Log Message User username logged in from host hostname on device tty-name
Description The indicated username was authenticated and logged into the shell specified for it in
the password file.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_AUTH
LOGIN_LOCAL_PASSWORD
System Log Message Requested local password from user username
Description The PAM authentication attempt failed for the indicated user, who was prompted for
the password recorded in the local password file.
Copyright © 2010, Juniper Networks, Inc.432
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English