Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 80
SMTPD System Log Messages
This chapter describes messages with the SMTPD prefix. They are generated by smtp
client process (smtpd).
SMTPD_DROP_MAIL_PAYLOAD
System Log Message Dropped mail to user:error-message. Send failed or queued reached max
Description The smtp client process (smtpd) attempted to send the mail payload to the configured
gateway mail server failed due to one of the following reasons: network connection
failure, error in the payload, or sent failed after retries. The mail is dropped.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
SMTPD_NO_CONFIGURED_SERVER
System Log Message Unable to send mail to error-message. Configure server with relay
Description The smtp client process (smtpd) is unable to send mail payload. A gateway server must
be configured. This server must allow relaying.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
593Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English