Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 42
JSRPD System Log Messages
This chapter describes messages with the JSRPD prefix. They are generated by the Juniper
Services Redundancy Protocol (jsrpd) process, which controls chassis clustering.
JSRPD_DAEMONIZE_FAILED
System Log Message Aborting, unable to run in the background as a daemon: error-message
Description The Juniper Services Redundancy Protocol process (JSRPD) failed to create a version of
itself to run in the background.
Type Error: An error occurred
Severity emergency
Facility LOG_DAEMON
JSRPD_DUPLICATE
System Log Message Another copy of this program is running
Description The Juniper Services Redundancy Protocol process (JSRPD) detected that another
version of itself is already running.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_NODE_STATE_CHANGE
System Log Message Nodechassis-id state due to reason
Description The Juniper Services Redundancy Protocol process (JSRPD) detected an event, such as
failover, that caused the state of the chassis cluster node to change due to the reason
indicated in the log.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
317Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English