Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Cause A link failure occurred and the secondary node is disabled.
Cause The secondary node has recovered from link failure and is being rebooted to recover from
the disabled state.
Action Contact your technical support representative.
JSRPD_NOT_ROOT
System Log Message Must be run as root
Description The Juniper Services Redundancy Protocol process (JSRPD) can be instantiated only by
the user with root privileges.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_PID_FILE_LOCK
System Log Message Unable to lock PID file: error-message
Description The Juniper Services Redundancy Protocol process (JSRPD) failed to lock the PID file,
which serves to prevent multiple instances of the process from running simultaneously.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_PID_FILE_UPDATE
System Log Message Unable to update process PID file: error-message
Description The Juniper Services Redundancy Protocol process (JSRPD) failed to update the PID file,
which serves to prevent multiple instances of the process from running simultaneously.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_REDUNDANCY_MODE_CHANGE
System Log Message Redundancy mode change will not be effective until all nodes in the cluster are rebooted
simultaneously
Description The Juniper Services Redundancy Protocol process (JSRPD) detecteda change in chassis
cluster redundancy mode. The new mode is not effective until all nodes in the cluster
are rebooted.
Copyright © 2010, Juniper Networks, Inc.318
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English