Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
JSRPD_REDUNDANCY_MODE_MISMATCH
System Log Message Change in HA redundancy mode detected..please reboot all nodes in the cluster
simultaneously!!
Description The Juniper Services Redundancy Protocol process (JSRPD) detected a change in the
chassis cluster redundancy mode configuration and detected that only some (not all)
of the nodes rebooted. The new mode is not effective until all nodes in the cluster are
rebooted.
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
JSRPD_RG_STATE_CHANGE
System Log Message Redundancy-group rg-id transitioned from 'old-state' to 'new-state' state due to reason
Description The Juniper Services Redundancy Protocol process (JSRPD) detected an event that
caused the state of the chassis cluster redundancy group to change due to the reason
indicated in the log.
Type Event: This message reports an event, not an error
Severity alert
Facility LOG_DAEMON
JSRPD_SET_CS_MON_FAILURE
System Log Message Cold-sync Monitor failed for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected cold-sync
monitoring failure for a redundancy group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_SET_INTF_MON_FAILURE
System Log Message Interface Monitor failed for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected interface monitoring
failure for a redundancy group.
Type Error: An error occurred
319Copyright © 2010, Juniper Networks, Inc.
Chapter 42: JSRPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English