Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

Severity error
Facility LOG_DAEMON
JSRPD_SET_IP_MON_FAILURE
System Log Message IP Monitor failed for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected IP address
monitoring failure for a redundancy group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_SET_NPC_MON_FAILURE
System Log Message NPC Monitor failed for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected Network Processing
Card (NPC) monitoring failure for a redundancy group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_SET_OTHER_INTF_MON_FAIL
System Log Message Interface Monitor failed on other node for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected interface monitoring
failure on the other node for a redundancy group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_SET_SPU_MON_FAILURE
System Log Message SPU Monitor failed for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected Services Processing
Unit (SPU) monitoring failure for a redundancy group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_SOCKET_CREATION_FAILURE
System Log Message Socket creation (server) failed unexpectedly error-message.
Copyright © 2010, Juniper Networks, Inc.320
Junos 10.3 System Log Messages Reference