Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Chapter 7 APPTRACK System Log Messages

CHAPTER 7
APPTRACK System Log Messages
This chapter describes messages with the APPTRACK prefix. They are generated by the
application tracking process (apptrack).
APPTRACK_SESSION_APP_UPDATE
System Log Message AppTrack app update: source-address/source-port->destination-address/destination-port
service-name application nested-application
nat-source-address/nat-source-port->nat-destination-address/nat-destination-port
src-nat-rule-name dst-nat-rule-name protocol-id policy-name source-zone-name
destination-zone-name session-id-32 packets-from-client(bytes-from-client)
packets-from-server(bytes-from-server) elapsed-time
Description The log is sent when an application identification service identified a application in a
session.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
APPTRACK_SESSION_CLOSE
System Log Message AppTrack session closed reason:
source-address/source-port->destination-address/destination-port service-name
application nested-application
nat-source-address/nat-source-port->nat-destination-address/nat-destination-port
src-nat-rule-name dst-nat-rule-name protocol-id policy-name source-zone-name
destination-zone-name session-id-32 packets-from-client(bytes-from-client)
packets-from-server(bytes-from-server) elapsed-time
Description A security session being tracked by the Application tracking service was closed.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
71Copyright © 2010, Juniper Networks, Inc.