Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

APPTRACK_SESSION_CREATE
System Log Message AppTrack session created
source-address/source-port->destination-address/destination-port service-name
application nested-application
nat-source-address/nat-source-port->nat-destination-address/nat-destination-port
src-nat-rule-name dst-nat-rule-name protocol-id policy-name source-zone-name
destination-zone-name session-id-32
Description A security session was created which will be monitored by the Application tracking service.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
APPTRACK_SESSION_VOL_UPDATE
System Log Message AppTrack volume update:
source-address/source-port->destination-address/destination-port service-name
application nested-application
nat-source-address/nat-source-port->nat-destination-address/nat-destination-port
src-nat-rule-name dst-nat-rule-name protocol-id policy-name source-zone-name
destination-zone-name session-id-32 packets-from-client(bytes-from-client)
packets-from-server(bytes-from-server) elapsed-time
Description Periodic updates are sent for a session monitored by the Application tracking service.
The periodicity is decided by configuration.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
Copyright © 2010, Juniper Networks, Inc.72
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English