CHAPTER 11
AUTHD System Log Messages
This chapter describes messages with the AUTHD prefix. They are generated by the
generic authentication service process (authd) which is a security service that verifies
an identity that is claimed by or for a system entity.
AUTHD_AUTH_CREATE_FAILED
System Log Message Unable to allocate authentication handle: error-message
Description The generic authentication service process (authd) could not allocate an authentication
object for the indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
AUTHD_RADIUS_GETHOSTNAME_FAILED
System Log Message Unable to obtain hostname for outgoing RADIUS message: error-message
Description The generic authentication service process (authd) could not obtain a hostname for an
outgoing RADIUS message.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
AUTHD_SERVER_INIT_BIND_FAIL
System Log Message Unable to bind to socket file-descriptor: error-message (errno error-code)
Description The generic authentication service process (authd) could not bind the server to the
address specified.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
109Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...