Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 31
FSAD System Log Messages
This chapter describes messages with the FSAD prefix. They are generated by the File
System Access process (fsad), which provides Trivial FTP (TFTP) support for file transfer
between services PICs and other routing platform components.
FSAD_CONFIG_ERROR
System Log Message Reason: reason
Description The configuration file for the File System Access process (fsad) might contain an error.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FSAD_CONNTIMEDOUT
System Log Message Connection timed out to the client (connection-type, ip-address) having request type
port
Description The File System Access process (fsad) flushed all state information about the timed-out
connection.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
FSAD_DIR_CREATE
System Log Message Failed to create directory directory-name: error-message
Description The File System Access process (fsad) could not create the indicated directory.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
271Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English