FSAD_DIR_STAT
System Log Message function-name: stat() failed for pathname pathname: reason
Description The File System Access process (fsad) received a request for a nonexistent file or directory.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause The path does not exist.
Action Make sure the path specified in the request is valid.
FSAD_FAILED
System Log Message In enclosing-function-name: function-name() returned: reason
Description An internal error occurred inside a function in the File System Access process (fsad).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
FSAD_FILE_FAILED
System Log Message enclosing-function-name: function-name failed for file 'filename' with error message
reason
Description An internal error occurred while the File System Access process (fsad) was performing
a file operation.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
FSAD_FILE_REMOVE
System Log Message Unable to remove file 'filename': reason
Copyright © 2010, Juniper Networks, Inc.272
Junos 10.3 System Log Messages Reference
To Next Page
Loading...