Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The File System Access process (fsad) could not remove the indicated file for the
indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause The file to be removed does not exist or its permissions do not allow the operation.
Action Make sure that the file exists and that its permissions allow it to be deleted.
FSAD_FILE_RENAME
System Log Message Unable to rename file 'source-filename' to 'destination-filename': reason
Description The File System Access process (fsad) could not rename the indicated file for the
indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause Either the source file does not exist, or one or both of the source and destination
pathnames are incorrect.
Action Make sure the source and destination paths exist and that the rename operation is
allowed.
FSAD_FILE_STAT
System Log Message function-name: stat() failed for file pathname pathname: reason
Description The File System Access process (fsad) received a request for a nonexistent file.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause The file path does not exist.
Action Make sure the path specified in the request is valid.
FSAD_FILE_SYNC
System Log Message Unable to sync file 'filename': reason
273Copyright © 2010, Juniper Networks, Inc.
Chapter 31: FSAD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English