Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description When closing a file, the File System Access process (fsad) executes the sync() system
call to ensure that any changes to the file are committed to disk. This operation failed
for the indicated file.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FSAD_FLOWC_IPC_PAYLOAD_SIZE
System Log Message Received flowc IPC message with incorrect length: message type message-type, subtype
message-subtype, opcode operation-code, length length (expected length expected-value)
Description The File System Access process (fsad) received a flow collector IPC message in which
the payload length was incorrect.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FSAD_FLOWC_IPC_SUBTYPE
System Log Message Received flowc IPC message with incorrect subtype: message type message-type, subtype
message-subtype, opcode operation-code, length length
Description The File System Access process (fsad) received a flow collector IPC message in which
the subtype field was incorrect.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FSAD_FLOWC_IPC_TYPE
System Log Message Received flowc IPC message with incorrect type: message type message-type, subtype
message-subtype, opcode operation-code, length length
Description The File System Access process (fsad) received a flow collector IPC message in which
the type field was incorrect.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FSAD_FLOWC_IPC_VERSION
System Log Message Received flowc IPC message with incorrect version received-value (expected version
expected-value)
Copyright © 2010, Juniper Networks, Inc.274
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English