Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 27
EVENTD System Log Messages
This chapter describes messages with the EVENTD prefix. They are generated by the
event policy process (eventd), which performs configured actions in response to events
on a routing platform that trigger system log messages.
EVENTD_ACK_FAILED
System Log Message Unable to send acknowledgment: error-message
Description Junos processes can request that the event processing process (eventd) notify them
when a specific event occurs. The eventd process could not send an acknowledgment
for a registration request, for the indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
EVENTD_ALARM_CLEAR
System Log Message User username cleared alarm: "timestamp: message"
Description An administrator has acknowledged and cleared a security alarm.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
EVENTD_COMMAND_SUBSTITUTE_ERROR
System Log Message Variable substitution failed for command 'command'
Description The event processing process (eventd) can be configured to execute a Junos
command-line interface (CLI) command when a specified event occurs. The command
can include one or more variables (such as an interface name), which the eventd process
replaces with actual values related to the event when it issues the command. Variable
substitution failed for the indicated command.
Type Error: An error occurred
257Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English