EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Severity critical
Facility LOG_DAEMON
SNMPD_TRAP_GEN_FAILURE
System Log Message function-name: SNMP trap error: trap-message (error-message)
Description The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
generate a trap.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_TRAP_INVALID_DATA
System Log Message function-name: SNMP trap error: invalid message (value) received
Description The Simple Network Management Protocol (SNMP) agent process (snmpd) received a
trap message from a subagent that contained an invalid variable binding (varbind) type.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_TRAP_QUEUED
System Log Message Adding trap to trap-destination to queue-name queue, size traps in queue
Description A trap was queued for later transmission.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
Cause Possible causes include the following: (a) the system is not completely initialized, (b) a
route does not exist, or (c) traps are being throttled.
Copyright © 2010, Juniper Networks, Inc.608
Junos 10.3 System Log Messages Reference

Table of Contents

Related product manuals