SNMPD_SYSOID_FAILURE
System Log Message Unable to determine sysObjectID from internal model: model
Description The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
determine the value of the sysObjectID object.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_SYSOID_GEN_FAILURE
System Log Message Unable to generate OID for product product-name (error-message)
Description The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
generate a value for the sysObjectID object for the indicated product.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_THROTTLE_QUEUE_DRAINED
System Log Message function-name: cleared all throttled traps
Description The queue of throttled traps was cleared.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
SNMPD_TRAP_COLD_START
System Log Message function-name: SNMP trap: cold start
Description The Simple Network Management Protocol (SNMP) agent process (snmpd) generated
a cold-start trap when the entire Routing Engine (including the snmpd process) initialized.
Type Event: This message reports an event, not an error
607Copyright © 2010, Juniper Networks, Inc.
Chapter 82: SNMPD System Log Messages
To Next Page
Loading...