Facility LOG_DAEMON
SPD_CONN_OPEN_FAILURE
System Log Message function-name: unable to open connection to interface-name (error-message)
Description The adaptive services process (spd) attempted to open a connection to the indicated
interface on an Adaptive Services PIC, to gather information requested in a Simple
Network Management Protocol (SNMP) query. The attempt failed for the indicated
reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
SPD_CONN_SEND_FAILURE
System Log Message function-name: unable to send query to interface-name (error-message)
Description The adaptive services process (spd) attempted to send a request for information, needed
for a Simple Network Management Protocol (SNMP) query, to the indicated interface
on an Adaptive Services PIC. The attempt failed for the indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
SPD_CONN_UNEXPECTED_MSG
System Log Message function-name: unexpected response received from interface-name (error-message)
Description The adaptive services process (spd) sent a request for information, needed for a Simple
Network Management Protocol (SNMP) query, to the indicated interface on an Adaptive
Services PIC. It received an unexpected response.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
SPD_DAEMONIZE_FAILED
System Log Message Aborting, unable to run in the background as a daemon: error-message
Description The adaptive services process (spd) could not create a version of itself to run in the
background as a daemon.
Type Error: An error occurred
Severity emergency
Facility LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.612
Junos 10.3 System Log Messages Reference
To Next Page
Loading...