SPD_DB_IF_ADD_FAILURE
System Log Message Unable to add database entry for interface-name: error-message
Description The adaptive services process (spd) uses an internal database to store information
needed to reply to Simple Network Management Protocol (SNMP) queries. It could not
add an entry to the database for the indicated interface on an Adaptive Services PIC.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
SPD_DB_IF_ALLOC_FAILURE
System Log Message Unable to allocate database entry for interface-name: error-message
Description The adaptive services process (spd) uses an internal database to store information
needed to reply to Simple Network Management Protocol (SNMP) queries. It could not
allocate an entry in the database for the indicated interface on an Adaptive Services PIC.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
SPD_DB_SVC_SET_ADD_FAILURE
System Log Message Unable to add database entry for service-set: error-message
Description The adaptive services process (spd) uses an internal database to store information
needed to reply to Simple Network Management Protocol (SNMP) queries. It could not
add an entry to the database for the indicated service set.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
SPD_DB_SVC_SET_ALLOC_FAILURE
System Log Message Unable to allocate database entry for service-set: error-message
Description The adaptive services process (spd) uses an internal database to store information
needed to reply to Simple Network Management Protocol (SNMP) queries. It could not
allocate an entry in the database for the indicated service set.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
613Copyright © 2010, Juniper Networks, Inc.
Chapter 83: SPD System Log Messages
To Next Page
Loading...
Need help?
General
