Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Facility LOG_PFE
RT_GTP_PKT_DESCRIPTION_CHARGING
System Log Message GTP source-address -> destination-address charging vmajor-version
Description Displays the GPRS tunneling protocol (GTP) packet description for a GTP charging
message. The description includes the source and destination address and version.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_PKT_DESCRIPTION_V0
System Log Message GTP source-address -> destination-address TID gtp-mobile-id1gtp-mobile-id2 (index
gtp-array-index)
Description Displays the GPRS tunneling protocol (GTP) packet description for a GTP version 0
message. The description includes the source and destination address, 64-bit tunnel ID,
and index.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_PKT_DESCRIPTION_V1
System Log Message GTP source-address -> destination-address TeID xgtp-teid (index gtp-array-index)
Description Displays the GPRS tunneling protocol (GTP) packet description for a GTP version 1
message. The description includes the source and destination address, tunnel endpoint
ID, and index.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_PKT_ENDUSER_ADDR_IE_IPV4
System Log Message EndUserAddr IE: ip-address
Description Displays the contents of the IPv4 End User Address information element carried in the
GPRS tunneling protocol (GTP) message. The content includes the end user IP address.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
571Copyright © 2010, Juniper Networks, Inc.
Chapter 74: RT System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English