Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

RT_GTP_PKT_GSNADDR_IE
System Log Message GSNaddr IE: ip-address
Description Displays the contents of the GPRS Support Node (GSN) Address information element
carried in the GPRS tunneling protocol (GTP) message. The content includes the GSN
IP address.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_PKT_IMSI_IE
System Log Message IMSI IE: gtp-mobile-id1gtp-mobile-id2
Description Displays the contents of the International Mobile Subscriber Identity (IMSI) information
element carried in the GPRS tunneling protocol (GTP) message. The content includes
the lower and higher halves of the GTP mobile ID.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_PKT_MSISDN_IE
System Log Message MSisdn IE: gtp-isdn-number
Description Displays the contents of the MS International PSTN/ISDN Number (MSISDN) information
element carried in the GPRS tunneling protocol (GTP) message. The content includes
the ISDN number.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_PKT_RESULT
System Log Message ***message
Description Displays the GPRS tunneling protocol (GTP) packet process result, providing information
about whether the packet is passed or dropped.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
Copyright © 2010, Juniper Networks, Inc.572
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English