Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

RT_GTP_SANITY_EXTENSION_HEADER
System Log Message *** GTP-DROP message-type (sanity): wrong extension header
Description The GPRS tunneling protocol (GTP) packet has an incorrect extension header and the
packet will be dropped.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_GTP_SYSTEM_ERROR
System Log Message *** GTP-DROP message-type: bad system status (error-code)
Description The GPRS tunneling protocol (GTP) packet was dropped due to a firewall system error,
as indicated by the error code.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_H323_CALL_LIMIT_EXCEED
System Log Message Failed to process the packet, active call limit exceeded maximum-value
Description The maximum H.323 call limit has been exceeded.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_H323_NAT_COOKIE_NOT_FOUND
System Log Message object-name cannot find cookie from session
Description Failed to find the H.323 NAT cookie.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_IPSEC_BAD_SPI
System Log Message IPSec tunnel on int interface-name with tunnel ID 0xtunnel-id received a packet with a
bad SPI. source-address->destination-address/length, type, SPI 0xindex, SEQ
0xsequence-number.
Description Received IPSec packet with bad SPI
573Copyright © 2010, Juniper Networks, Inc.
Chapter 74: RT System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English