Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_IPSEC_REPLAY
System Log Message Replay packet detected on IPSec tunnel on interface-name with tunnel ID 0xtunnel-id!
From source-address to destination-address/length, type, SPI 0xindex, SEQ
0xsequence-number.
Description Received IPSec replay packet
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_MGCP_CALL_LIMIT_EXCEED
System Log Message Exceed maximum call max active call numbermaximum-value
Description The maximum MGCP active call limit has been exceeded.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_MGCP_DECODE_FAIL
System Log Message Failed to decode MGCP packet
Description Failed to decode MGCP message.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_MGCP_MEM_ALLOC_FAILED
System Log Message Failed to allocate memory for object-name
Description Failed to allocate memory for the MGCP objects.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_MGCP_REG_NAT_VEC_FAIL
System Log Message Failed to add MGCP object-name to flow module
Copyright © 2010, Juniper Networks, Inc.574
Junos 10.3 System Log Messages Reference
To Next Page
Loading...