Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description Failed to register the MGCP ALG vector with the flow module.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_MGCP_REG_RM_FAIL
System Log Message Failed to register MGCP ALG with Resource Manager
Description Failed to register the MGCP Resource Manager client.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_MGCP_REM_NAT_VEC_FAIL
System Log Message Failed to remove MGCP object-name from flow module
Description Failed to remove the MGCP ALG vector from the flow module.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_MGCP_RM_CLIENTID_FAIL
System Log Message MGCP ALG Resource Manager client registration failed
Description Failed to obtain the MGCP Resource Manager client identifier.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_MGCP_UNREG_BY_RM
System Log Message MGCP ALG client has been unregistered by Resource Manager
Description The Resource Manager has unregistered the MGCP Resource Manager client.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_SCCP_CALL_LIMIT_EXCEED
System Log Message Failed to create SCCP ALG call, call limit maximum-value exceeded
575Copyright © 2010, Juniper Networks, Inc.
Chapter 74: RT System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English