Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The maximum SCCP call limit has been exceeded.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_SCCP_CALL_RATE_EXCEED
System Log Message The SCCP active call rate limit maximum-value has been exceeded
Description The SCCP active call rate limit has been exceeded.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_SCCP_DECODE_FAIL
System Log Message Failed to decode SCCP packet from source-address->destination-address
Description Failed to decode SCCP packet.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_SCCP_NAT_COOKIE_NOT_FOUND
System Log Message Failed to find SCCP ALG cookie from session
Description Failed to find SCCP NAT cookie.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_SCCP_REM_NAT_VEC_FAIL
System Log Message Failed to remove SCCP ALG vector from flow module
Description Failed to remove the SCCP ALG vector from the flow module.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_SCCP_UNREG_RM_FAIL
System Log Message Failed to unregister SCCP client from Resource Manager when the ALG was unregistered
Copyright © 2010, Juniper Networks, Inc.576
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English