Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

RPD_TASK_REINIT
System Log Message Reinitializing
Description The routing protocol process (rpd) reinitialized.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
RPD_TASK_SIGNALIGNORE
System Log Message sigaction(SIGsignal-name): error-message
Description The routing protocol process (rpd) informed the kernel that it wished to ignore the
indicated signal, but the kernel failed to process the request.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_TRACE_FAILED
System Log Message Unable to write to trace file filename
Description The routing protocol process (rpd) could not write to the indicated trace file, and stopped
attempting to do so. The next commit of the configuration database will reenable tracing.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
RPD_VPLS_INTF_NOT_IN_SITE
System Log Message Some interfaces of instance instance are not configured under its single site
Description Some interfaces of the indicated vpls instance have not been configured under the sole
site of the instance.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
Action Configure all interfaces of the instace under its single site.
Copyright © 2010, Juniper Networks, Inc.568
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English