Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The MIB II process (mib2d) could not open the indicated file.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
MIB2D_IFD_IFDINDEX_FAILURE
System Log Message Ifd index assigned to interface-name changed from old-value to new-value, removing old
interface
Description There was a change to the ifd Index assigned to the indicated existing interface.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
MIB2D_IFD_IFINDEX_FAILURE
System Log Message SNMP index assigned to interface-name changed from old-value to new-value
Description There was a change to the SNMP ifIndex assigned to the indicated existing interface.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
MIB2D_IFL_IFINDEX_FAILURE
System Log Message SNMP index assigned to interface-name.interface-unit changed from old-value to
new-value
Description There was a change to the SNMP ifIndex assigned to the indicated existing interface.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.444
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English