Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Facility LOG_AUTH
Action Contact your technical support representative.
DHCPD_RTSOCK_FAILURE
System Log Message Error with rtsock: error-message
Description The Dynamic Host Configuration Protocol server process (dhcpd) experienced the
indicated error with a routing socket.
Type Error: An error occurred
Severity info
Facility LOG_AUTH
Cause An internal software failure occurred.
Action Contact your technical support representative.
DHCPD_SENDMSG_FAILURE
System Log Message sendmsg() from source-address to port destination-port at destination-address via
interface interface-name and routing instance routing-instance failed: error-message
Description The Dynamic Host Configuration Protocol server process (dhcpd) could not send data
from the indicated source (address, interface, and routing instance) to the indicated
destination (port and address), which it needs to do during normal operation.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Contact your technical support representative.
DHCPD_SENDMSG_NOINT_FAILURE
System Log Message sendmsg() from source-address to port destination-port at destination-address via routing
instance routing-instance failed: error-message
Description The Dynamic Host Configuration Protocol server process (dhcpd) could not send data
from the indicated source (address and routing instance) to the indicated destination
(port and address), which it needs to do during normal operation.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Contact your technical support representative.
241Copyright © 2010, Juniper Networks, Inc.
Chapter 24: DHCPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English