Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The Dynamic Host Configuration Protocol server process (dhcpd) could not allocate
memory from the heap for the indicated object.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Contact your technical support representative.
DHCPD_OVERLAY_CONFIG_FAILURE
System Log Message Unable to open overlay configuration: error-message
Description The Dynamic Host Configuration Protocol server process (dhcpd) could not open an
overlay configuration file for parsing.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Contact your technical support representative.
DHCPD_OVERLAY_PARSE_FAILURE
System Log Message Unable to parse overlay configuration because of count syntax errors
Description The Dynamic Host Configuration Protocol server process (dhcpd) could not parse its
overlay configuration because the configuration contained the indicated number of syntax
errors.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Cause An internal software failure occurred.
Action Contact your technical support representative.
DHCPD_RECVMSG_FAILURE
System Log Message Exiting due to too many recvmsg() failures
Description The Dynamic Host Configuration Protocol server process (dhcpd) could not receive data
from the network, which it needs to do during normal operation.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.240
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English