Severity error
Facility LOG_AUTH
DYNAMIC_VPN_AUTH_MUL_CONN
System Log Message Connection exists for type username at client-name client-id
Description Connection already existed for this user
Type Event: This message reports an event, not an error
Severity error
Facility LOG_AUTH
DYNAMIC_VPN_AUTH_NO_CONFIG
System Log Message Authentication failed for type username due to unavailable client config
Description The connection manager authentication process was unable to obtain client config for
the indicated user/token
Type Event: This message reports an event, not an error
Severity error
Facility LOG_AUTH
DYNAMIC_VPN_AUTH_NO_LICENSE
System Log Message Authentication failed for type username due to unavailable license
Description The connection manager authentication process was unable to obtain license for the
indicated user/token
Type Event: This message reports an event, not an error
Severity error
Facility LOG_AUTH
DYNAMIC_VPN_AUTH_OK
System Log Message type username with client-name client-id authenticated successfully.
Description The connection manager authentication process was able to authenticate the indicated
user/token successfully
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_AUTH
DYNAMIC_VPN_CLIENT_CONFIG_WRITE
System Log Message Client VPN config is saved in file filename for user username
Copyright © 2010, Juniper Networks, Inc.244
Junos 10.3 System Log Messages Reference
To Next Page
Loading...