Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 538

PING_INGRESS_JTR_THRESH_EXCEED
System Log Message pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
Description The jitter for the ingress trip time exceeded the configured threshold during the indicated
test conducted by the indicated user.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
PING_INGRESS_STDDV_THRESH_EXCEED
System Log Message pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
Description The standard deviation of the ingress trip time exceeded the configured threshold during
the indicated test conducted by the indicated user.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
PING_INGRESS_THRESHOLD_EXCEEDED
System Log Message pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
Description The ingress trip time measured for a probe exceeded the configured threshold during the
indicated test conducted by the indicated user.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
PING_PROBE_FAILED
System Log Message pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
Description The number of successive probe failures exceeded the pingCtlTrapProbeFailureFilter
threshold.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
PING_RTT_JTR_THRESH_EXCEED
System Log Message pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
Description The jitter for the round trip time exceeded the configured threshold during the indicated
test conducted by the indicated user.
Copyright © 2010, Juniper Networks, Inc.474
Junos 10.3 System Log Messages Reference