Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
JCS_INVALID_BANDWIDTH_ERROR
System Log Message Invalid bandwidth percent (value)
Description The specified switch bandwidth is invalid. The bandwidth is defined as a percentage
between 1 and 100.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_KERNEL_RSD_LINK_DOWN
System Log Message Kernel RSD link is DOWN (error-message)
Description The JCS process (jcsd) has disabled kernel RSD communcation for the specified reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_KERNEL_RSD_LINK_ENABLED
System Log Message Kernel RSD link is ENABLED (error-message)
Description The JCS process (jcsd) has verified the blade bay data and enabled kernel RSD
communication.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
JCS_MM_COMMUNICATION_ERROR
System Log Message MM communication error (error-message)
Description The JCS process (jcsd) could not send an SNMP request to the Management Module
because of the indicated error.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
307Copyright © 2010, Juniper Networks, Inc.
Chapter 39: JCS System Log Messages
To Next Page
Loading...