Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

JCS_MM_COMMUNICATION_OK
System Log Message MM communication is OK
Description The JCS process (jcsd) has established a communication link with the Management
Module.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
JCS_PEER_BLADE_STATE
System Log Message Peer blade slot is state
Description The JCS process (jcsd) detects a change of state for the indicated blade.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
JCS_READ_BANDWIDTH_ERROR
System Log Message Read bandwidth error (error-code)
Description The indicated error occured when attempting to read the current switch bandwidth.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_READ_BBD_ERROR
System Log Message Read blade bay data (error=error-code)
Description The indicated error occured when attempting to read the current blade bay data via a
sysctl call.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_RSD_LINK_STATE
System Log Message Switch slot RSD link state is state
Description The JCS process (jcsd) detects a change of state for the RSD link of the indicated switch
module.
Copyright © 2010, Juniper Networks, Inc.308
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English