Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
JCS_SWITCH_BANDWIDTH_CONFIG
System Log Message Switch slot bandwidth value1 percent (value2 KBPS)
Description The indicated JCS Switch Module has changed the bandwidth configuration to the
specified value.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
JCS_SWITCH_COMMUNICATION_ERROR
System Log Message Switch slot communication error (error-message)
Description The JCS process (jcsd) could not send an SNMP request to the indicated Switch Module
because of the indicated error.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_SWITCH_COMMUNICATION_OK
System Log Message Switch slot communication is OK
Description The JCS process (jcsd) has established a communication link with the indicated Switch
Module.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
309Copyright © 2010, Juniper Networks, Inc.
Chapter 39: JCS System Log Messages
To Next Page
Loading...