Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The stateful firewall received the packet with the indicated characteristics, which was
not an IP packet. The packet contained the indicated information about its protocol
(numerical identifier and name), source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_SFW_NO_POLICY
System Log Message source-address -> destination-addressNo policy
Description The stateful firewall received packets with the indicated source and destination addresses.
There was no matching policy for the traffic.
Type Event: This message reports an event, not an error
Severity critical
Facility LOG_PFE
ASP_SFW_NO_RULE_DROP
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics, because
the packet did not match and stateful firewall rules. In this case, the default action is to
discard the packet. The discarded packet contained the indicated information about its
protocol (numerical identifier and name), source (logical interface name, IP address,
and port number), and destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_SFW_PING_DUPLICATED_SEQNO
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the Internet Control Message Protocol (ICMP) echo
request packet with the indicated characteristics, because packet's sequence number
was the same as in a previous packet. The discarded packet contained the indicated
information about its protocol (numerical identifier and name), source (logical interface
name, IP address, and port number), and destination (IP address and port number).
Type Event: This message reports an event, not an error
Copyright © 2010, Juniper Networks, Inc.96
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English