AUDITD_RADIUS_SERVER_ADD_ERROR
System Log Message Unable to add RADIUS server radius-server: error-message
Description The audit process (auditd) read the RADIUS accounting server configuration, but could
not add the indicated server to the internal structure used to track servers.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
AUDITD_SOCKET_FAILURE
System Log Message function-name: unable to operation socket (error-message)
Description The audit process (auditd) listens on a Transmission Control Protocol (TCP) socket for
system accounting events reported by other processes on the routing platform. The
indicated socket operation failed with the indicated error.
Type Error: An error occurred
Severity emergency
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
107Copyright © 2010, Juniper Networks, Inc.
Chapter 10: AUDITD System Log Messages
To Next Page
Loading...