EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 247

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHASSISD_LOST_MASTERSHIP
System Log Message Routing Engine lost mastership; exiting
Description The chassis process (chassisd) running on the master Routing Engine exited, because
mastership switched to the other Routing Engine.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_MAC_ADDRESS_AE_ERROR
System Log Message chassisd MAC address allocation error for aedevice-id
Description The chassis process (chassisd) could not obtain a media access control (MAC) address
for the indicated aggregated Ethernet interface because of an internal error.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_MAC_ADDRESS_CBP_ERROR
System Log Message chassisd MAC address allocation error for CBP
Description The chassis process (chassisd) could not obtain a media access control (MAC) address
for a customer backbone port because of an internal error.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_MAC_ADDRESS_ERROR
System Log Message chassisd MAC address allocation exceed error for FPC fpc-slot, PIC pic-slot, port port
Description The chassis process (chassisd) could not obtain a media access control (MAC) address
for the indicated interface because of an internal error.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_MAC_ADDRESS_FABRIC_ERR
System Log Message Unable to allocate MAC address for fabric interface device-id
183Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages

Table of Contents

Related product manuals