Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

COSD_HIGH_PRIO_QUEUES_SESSION
System Log Message Unable to apply CoS to L2TP session session-id, because multiple schedulers in scheduler
map scheduler-map have "high,""medium-high," or "strict-high" priority
Description The class-of-service (CoS) process (cosd) did not apply CoS settings to the indicated
Layer 2 Tunneling Protocol (L2TP) session, because the scheduler map specified by the
RADIUS server for the session includes more than one scheduler that has high,
medium-high, or strict-high priority. For interfaces that are housed by certain Physical
Interface Cards (PICs), such as an IQ2 PIC, the scheduler map can include only one
scheduler that specifies one of those three priority levels. In terms of configuration, the
'priority' statement at the [edit class-of-service schedulers <scheduler-name>] hierarchy
level has the value 'high, ' 'medium-high, ' or 'strict-high' for more than one of the
schedulers in the map. The map is associated with a traffic control profile that is named
by an attribute in the RADIUS server's configuration file, which makes the profile apply
to the session.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Correct the configuration so that the scheduler map includes only one scheduler with
high, medium-high, or strict-high priority.
COSD_HWDB_OPEN_FAILED
System Log Message Unable to open chassis hardware database: error-message
Description The class-of-service (CoS) process (cosd) encountered the indicated error while opening
the chassis hardware database.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
COSD_IFD_OUTPUT_SHAPING_RATE_ERR
System Log Message Traffic shaping not supported on interface device interface-name
Description The class-of-service (CoS) process (cosd) did not apply the shaping rate that is configured
for the indicated interface.
Type Error: An error occurred
Severity error
217Copyright © 2010, Juniper Networks, Inc.
Chapter 20: COSD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English