Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity warning
Facility ANY
Cause This is a warning message and the current configuration has a few discrepancies to be
addressed.
Action Contact your technical support representative.
DCD_PARSE_EMERGENCY
System Log Message dcd_config: errors while parsing configuration file
Description The interface process (dcd) encountered an unhandled internal state while parsing the
configuration database.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause There might be a bug in the dcd process' parser.
Action Contact your technical support representative.
DCD_PARSE_ERROR_CLOCK
System Log Message PIC housing interface interface-name does not support clocking as configured
Description The 'clocking' statement is included at the [edit interfaces] hierarchy level for the indicated
interface, but is not supported by the 10-Gigabit Ethernet IQ2 Physical Interface Card
(PIC).
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Remove the 'clocking' statement from the configuration for the interface.
DCD_PARSE_ERROR_HIER_SCHEDULER
System Log Message interface-name: PIC or encapsulation type does not support 'hierarchical-scheduler'
statement
Description The 'hierarchical-scheduler' statement is included at the [edit interfaces] hierarchy level
for the indicated interface, but is not supported either by the PIC or the configured type
of encapsulation.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.228
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English