Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

ESWD_DHCP_UNTRUSTED
System Log Message count untrusted type received, interface interface-name[index interface-device-index],
vlan vlan-name[index vlan-id], server ip/mac source-address/mac1, offer ip/client mac
client-address/mac2
Description DHCP server packets are being received on a port which was not meant to receive server
traffic.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_INVALID_MAC_ADDRESS
System Log Message Invalid MAC address mac-addresse received on interface-name
Description Received a MAC address that is not in the configured valid MAC addresses for this
interface.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
Cause MAC address recieved is not configured as a valid MAC address for this interface.
ESWD_MAC_LIMIT_ALERT
System Log Message MAC limit is less than the current number of MACs for the interface. You might want to
remove some of the MACs for interface interface-name using `clear ethernet-switching
table' command
Description Log message alerting user to clear the MACs because the number of MACs learned on
an interface exceeds the mac limit
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_MAC_LIMIT_BLOCK
System Log Message MAC limit (limit) exceeded at interface-name: shutting down the interface
Description Interface was blocked because the number of MAC addresses learned on an interface
has exceeded the user configured limit.
Type Error: An error occurred
Severity alert
Copyright © 2010, Juniper Networks, Inc.250
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English