Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

EVENTD_PIPE_CREATION_FAILED
System Log Message Unable to create pipe: error-message
Description The event processing process (eventd) could not create a pipe for interprocess
communication.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
EVENTD_POLICY_ACTION_FAILED
System Log Message Unable to execute 'action' action in policy policy-name
Description The event processing process (eventd) could not perform the indicated action, which is
specified by the indicated policy.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
EVENTD_POLICY_LIMIT_EXCEEDED
System Log Message Unable to execute policy 'policy-name' because current number of policies (count)
exceeds system limit (limit)
Description The event processing process (eventd) could not execute the indicated policy, because
the indicated number of currently executing policies exceeded the indicated maximum
defined by the system.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
EVENTD_POLICY_UPLOAD_FAILED
System Log Message Unable to upload file 'filename' to destination 'destination-name' for policy 'policy-name'
Description The event processing process (eventd) could not upload the indicated file to the indicated
destination.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
EVENTD_POPEN_FAIL
System Log Message Error error-code in invoking command 'command'
259Copyright © 2010, Juniper Networks, Inc.
Chapter 27: EVENTD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English