Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity error
Facility LOG_DAEMON
FSAD_GEN_SERVICE_INACTIVE
System Log Message Received IPC message for inactive service service-name
Description The File System Access process (fsad) received an IPC message for a service that is
currently not active.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FSAD_GEN_SERVICE_INIT_FAILED
System Log Message Failed to initialize service service-name
Description The File System Access process (fsad) could not initialize the indicated service.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FSAD_MAXCONN
System Log Message Upper limit reached in fsad for handling connections
Description The File System Access process (fsad) stopped accepting new connections because it
reached an internal limit for handling connections.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
FSAD_MEMORYALLOC_FAILED
System Log Message allocation-function-name failed in the function function-name (line-number)
Description The File System Access process (fsad) could not allocate memory. The system might
be running low on memory.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
277Copyright © 2010, Juniper Networks, Inc.
Chapter 31: FSAD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English