Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 353

Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
FWAUTH_TELNET_USER_AUTH_FAIL
System Log Message User username at client-address is rejected.
Description User authentication failed because the username or password was invalid.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
FWAUTH_WEBAUTH_FAIL
System Log Message WebAuth user username at client-address is rejected/timed out.
Description The provided user credentials are not valid.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
FWAUTH_WEBAUTH_SUCCESS
System Log Message WebAuth user username of group group-name at client-address is accepted.
Description The authenticated user can start accessing protected resources.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
289Copyright © 2010, Juniper Networks, Inc.
Chapter 33: FWAUTH System Log Messages