JDIAMETERD_FUNC_OUT_OF_SYNC
System Log Message Application diameter-function is out of sync, disconnecting
Description The Diameter process (jdiameterd) was out of sync with the process that implements
the Diameter function. The connection was closed so that a new connection with full
resynchronization could be established.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JDIAMETERD_FUNC_PICACCEPT_NFOUND
System Log Message Port remote-port does not match any application
Description The Diameter process(jdiameterd) rejected a PIC function side connection because there
is no matching diameter-function.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JDIAMETERD_FUNC_TOO_MANY_BADE2ES
System Log Message Application diameter-function has too many bad end-to-end-ids, disconnecting
Description A daemon impelenting diameter function, sent too many messages with bad
end-to-end-ids the connection will be closed, so a new connection with full
resynchronization could be established.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JDIAMETERD_FUNC_USCK_LISTEN_FAIL
System Log Message Unable to listen on pathname
Description The Diameter process(jdiameterd) is unable to listen on the unix socket for function side
connections.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.312
Junos 10.3 System Log Messages Reference
To Next Page
Loading...