Severity info
Facility ANY
JPTSPD_SRC_FULL_SYNC_ABORT
System Log Message JPTSPD full synchronization was aborted partition-name
Description The packet triggered subscriber process (jptspd) aborted full synchronization with SRC.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
Cause One possible cause is that the connection between jptspd and SRC is down.
JPTSPD_SRC_FULL_SYNC_DONE
System Log Message JPTSPD full synchronization was done partition-name
Description The packet triggered subscriber process (jptspd) finished full synchronization with SRC.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
JPTSPD_SRC_FULL_SYNC_START
System Log Message JPTSPD full synchronization started partition-name
Description The packet triggered subscriber process (jptspd) started full synchronization with SRC.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
315Copyright © 2010, Juniper Networks, Inc.
Chapter 41: JPTSPD System Log Messages
To Next Page
Loading...