EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JSRPD_UNSET_IP_MON_FAILURE
System Log Message IP Monitor failure recovered for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected that the previous
IP address monitoring failure no longer exists for a redundancy group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_UNSET_NPC_MON_FAILURE
System Log Message NPC Monitor failure recovered for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected that the previous
Network Processing Card (NPC) monitoring failure no longer exists for a redundancy
group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_UNSET_OTHER_INTF_MON_FAIL
System Log Message Interface Monitor failure recovered on other node for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD)\ detected that the previous
interface monitoring failure on the other node no longer exists for a redundancy group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_UNSET_SPU_MON_FAILURE
System Log Message SPU Monitor failure recovered for redundancy-group rg-id
Description The Juniper Services Redundancy Protocol process (JSRPD) detected that the previous
Services Processing Unit (SPU) monitoring failure no longer exists for a redundancy
group.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JSRPD_USAGE
System Log Message Usage: jsrpd [-C] [-N] [-X] [-d debug-level] [-l] [-v]
Copyright © 2010, Juniper Networks, Inc.322
Junos 10.3 System Log Messages Reference

Table of Contents

Related product manuals