Facility LOG_DAEMON
Action Raise the traceroute path limit parameter.
MPLS_OAM_SEND_FAILED
System Log Message fec-address: unable to send probe (error-message)
Description The Multiprotocol Label Switching (MPLS) Operation, Administration, and Maintenance
(OAM) process (mplsoamd) could not send a traceroute probe packet.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
MPLS_OAM_SOCKET_OPEN_FAILED
System Log Message fec-address: unable to open socket (error-message)
Description The Multiprotocol Label Switching (MPLS) Operation, Administration, and Maintenance
(OAM) process (mplsoamd) could not open a socket to initiate a traceroute operation.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
MPLS_OAM_SOCKET_SELECT_FAILED
System Log Message fec-address: unable to select socket (error-message)
Description The Multiprotocol Label Switching (MPLS) Operation, Administration, and Maintenance
(OAM) process (mplsoamd) could not select a socket to initiate a traceroute operation.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
MPLS_OAM_TRACEROUTE_INTERRUPTED
System Log Message fec-address: topology update interrupted traceroute
Description A traceroute operation was interrupted by a topology change.
Copyright © 2010, Juniper Networks, Inc.450
Junos 10.3 System Log Messages Reference
To Next Page
Loading...