RPD_L2VPN_REMOTE_SITE_COLLISION
System Log Message Two remote PEs (RDs route-discriminator and route-discriminator2) have the same site
ID (identifier) in VPN vpn-name
Description The routing protocol process (rpd) for the indicated virtual private network (VPN) received
an advertisement from a remote provider edge (PE) router with the first indicated route
discriminator, but the associated site ID also belongs to a remote site with the second
route discriminator.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_L2VPN_SITE_COLLISION
System Log Message Same site ID identifier configured on remote PE (RD route-discriminator) and local PE in
VPN vpn-name (non-multihomed site name)
Description The routing protocol process (rpd) for the indicated virtual private network (VPN) received
an advertisement from a remote provider edge (PE) router, but the associated site ID
belongs to a local site.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
RPD_LAYER2_VC_BFD_DOWN
System Log Message BFD session for Layer 2 VC vc-name went down
Description The routing protocol process (rpd) determined that the Bidirectional Forwarding Detection
(BFD) protocol session for the indicated Layer 2 virtual private network (VPN) virtual
circuit (VC) terminated.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_LAYER2_VC_BFD_UP
System Log Message BFD session for Layer 2 VC vc-name came up
Description The routing protocol process (rpd) determined that the Bidirectional Forwarding Detection
(BFD) protocol session for the the indicated Layer 2 virtual private network (VPN) virtual
circuit (VC) came up.
Type Event: This message reports an event, not an error
Severity notice
521Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages
To Next Page
Loading...
Need help?
General
